6.18. host_status

These codes potentially come from the firmware on a host adapter or from one of several hosts that an adapter driver controls. The 'host_status' field has the following values whose #defines mimic those which are only visible within the kernel (with the "SG_ERR_" removed from the front of each define). A copy of these defines can be found in sg_err.h (see Appendix A):

The type of host_status is unsigned short .

Notes

[1]

In some cases the sym53cxx driver reports a DID_ERROR when it internally rounds up an odd transfer length by 1. This is an example of a "non-error".